Roll-A-Matic Tool Selection and Ordering Information
To order standard internal Roll-A-Matic tools use the tool number. Find
the diameter range that allows maximum adjustment above the burnishing
diameter and use the corresponding RAM number to place the order. To order a
self-feeding tool use the RAM number followed by the letter N (non-feed). To
order a
bottoming tool use the RAM number followed by the letter B (bottoming). Note:
A part print or sketch is requested when ordering a tool for a blind or
bottoming application.
EXAMPLE: A standard Roll-A-Matic tool for .500” (12.7 MM)
thru-hole would be ordered as a RAM-500. For
a machine-feed application the same tool would
be ordered as a RAM-500-N. For a bottoming
application, order the tool as a RAM-500-B.
INTERNAL SERIES SHANK
|
NOMINAL TOOL DIA. |
STANDARD SHANK |
OPTIONAL SHANK* |
|
.188 DIA.
TO 2.469 DIA. |
#2 MT |
#1 MT, #3
MT
.500 DIA. X 2.00 LG
.750 DIA. X 2.50 LG |
|
2.500 DIA
TO 3.969 DIA |
#3 MT |
#4 MT
1.250 DIA. X 3.00 LG
1.375 DIA. X 3.00 LG |
|
4.000 DIA.
TO 6.000 DIA |
#4 MT |
#5 MT
1.750 DIA. X 3.50 LG
2.000 DIA. X 3.50 LG |
EXTERNAL SERIES SHANK
|
SERIES |
STANDARD SHANK |
OPTIONAL SHANKS* |
|
I |
#2 MORSE TAPER |
#3 MORSE TAPER/1.000 DIA.
S.S. |
|
II |
#3 MORSE TAPER |
#4 MORSE TAPER/1.5 DIA. S.S. |
|
III |
#4 MORSE TAPER |
#3 MORSE TAPER/1.5 DIA. S.S. |
|
IV |
#4 MORSE TAPER |
#5 MORSE TAPER/1.5 DIA. S.S. |
|
V |
#5 MORSE TAPER |
#4 MORSE TAPER/1.75 DIA. S.S. |
All Roll-A-Matic tools are available with automotive
shanks or flange mounts as specials. Please specify the shank required at the
time the order is placed.
TO ORDER ROLL-A-MATIC TOOLS
Please print off and complete the Engineering Data Request
form.
You may phone, fax or email us with your order. If you have any
questions or for further information, please Contact Us.
* At no additional charge.
|
